The final installment in the series:

"The-Quest-For-Performance" from my blog Killing It with #perl

Discussing #python #numpy #numba, #rstats #openMP enhancements of Perl code and #simd

Bottom line: I will not be migrating to Python anytime soon.

Food for thought: The Perl interpreter (and many of the modules) are deep down massive C programs. Perhaps one can squeeze real performance kicks by looking into alternative compilers, compiler flags and pragmas ?

https://chrisarg.github.io/Killing-It-with-PERL/2024/07/09/The-Quest-For-Performance-Part-IV-May-the-SIMD-Force-Be-With-You.html

submitted by /u/ReplacementSlight413
[link] [comments]

Its been a long time since i've had to hack some code together so here just asking for advice as to where to start.

I have a group of printers (all have same web interface) on the corporate network. I would like to make a simple script that can login, and upload a config file (really its a list of users that have can scan documents, it doesn't matter what).

I've tried to google this with limited results, so wanted to reach out here to see if PERL would be the best answer for this.

I guess my question is, what modules should I look at to connect to a webpage in order to login then access a page behind the login and upload a file?

I looked into Mechanize but I do not believe it can handle javascript. Any advice or test scripts that do something similar would be greatly appreciated.

submitted by /u/hsvodka
[link] [comments]

Perl Weekly Challenge 274: Goat Latin

https://blogs.perl.org/users/laurent_r/2024/06/perl-weekly-challenge-274-goat-latin.html

I’m currently having to modify a library that used Smart::Match extensively since I can no longer turn off the zillions of lines of experimental warnings in recent Perls. For people who are in a similar situation it’s looking like Data::Compare can replace the situations where I was doing ‘@foo ~~ @bar’, and it’s easy enough to write a “does this hash have this key” helper.

Meta complaint: I was already a bit annoyed at the whole smartmatch “oh whoops actually this is now experimental” saga but now that I’m stuck fixing this breakage I’m $annoyed++. Im getting annoyed enough that I may choose an older Perl that was “good enough” and just stop using the new ones

See also: https://www.reddit.com/r/perl/comments/pimwma/how_do_i_stop_smartmatch_is_experimental_at/

submitted by /u/lovela47
[link] [comments]

Hello all I have a .pl CGI program that calls a module with lots of code I'll call it LotsOfCode.pm now I need to update a few subs in it and possibly add a dependency.

The pl file looks like this:

main.pl

use LotsOfCode;

Lotsofcode->cat();

LotsOfCode->dog();

Lotsofcode->fish();

Now I'd like this to say the same but I need to improve fish and cat. Say LotsOfCode.pm looks like this:

package LotsOfCode

sub fish {}

sub dog {}

sub cat {}

1;

I'd like to

mkdir ./LotsOfiCode

nano LotsOfCode/fish.pm move sub fish{} here

nano LotsOfCode/dog.pm move sub dog {} here

nano LotsOfCode/cat.pm move sub cat {} here

what do I put in the top of these new files in \LotsOfiCode ?

package LotsOfCode::fish;

or

package fish; ?

or

nothing is what I have so far just

sub fish {}

then in LotsOfCode.pm

do I go:

package LotsOfCode

use LotsOfiCode::fish

use LotsOfiCode::dog

use LotsOfiCode::cat

1;

or

do LotsOfCode::fish;

do LotsOfCode::cat;

do LotsOfCode::dog;

Thank you all in advance I get the more than one way to do it idea of Perl but feel like I keep fumbling with mixing old and new code.

submitted by /u/bug_splat
[link] [comments]

Filed under "Things that one can do, but why?" , here is the repo of using Perl to learn assembly, or rather use Perl to avoid

1. having a C driver program
2. make files
3. multiple files (Inline::ASM allows one to keep Perl and Assembly in the same file

Bonus :

1. it is insane how efficient some of the list utilities at List::Util are !
2. Seems Github uses file extensions to count lines of code in a language (the repo is considered all Perl

Link https://github.com/chrisarg/perlAssembly

submitted by /u/ReplacementSlight413
[link] [comments]

GitHub - chrisarg/perlAssembly: Examples of using Perl to augment NASM and vice versa

Examples of using Perl to augment NASM and vice versa - chrisarg/perlAssembly

^GitHub

Anybody wants to add a Perl implementation to this?

• https://antonz.org/uuidv7/
• https://github.com/nalgeon/uuidv7

(I'm currently on a train and have to change soon, but if nobody implements I might give it a try later)

submitted by /u/domm_plix
[link] [comments]

UUIDv7 in 20 languages

From JavaScript to Zig, no third-party dependencies.

^antonz.org

Neuigkeiten: OTOBO 11 Veröffentlicht

https://blogs.perl.org/users/otobo/2024/06/neuigkeiten-otobo-11-veroffentlicht.html

Making time to waste.

https://blogs.perl.org/users/saif/2024/06/making-time-to-waste.html

Enhancing non-Perl bioinformatic applications with #Perl: Building novel, component based applications using Object Orientation, PDL, Alien, FFI, Inline and OpenMP - Archive ouverte HAL https://hal.science/hal-04606172v1

Preprint for the #TPRC2024 talk to be delivered in 10days

submitted by /u/ReplacementSlight413
[link] [comments]

This might be Perl/docker-perl#161 but if I filed this in the wrong place, let me know. Keeping these things current is the sort of thing I'd pay for.

Pulling perl images locally give the same warnings for old perl versions, although my local docker will still run them:

$ docker pull perl:5.14 5.14: Pulling from library/perl Image docker.io/library/perl:5.14 uses outdated schema1 manifest format. Please upgrade to a schema2 image for better future compatibility. More information at https://docs.docker.com/registry/spec/deprecated-schema-v1/ 

/usr/bin/docker pull perl:5.14 5.14: Pulling from library/perl [DEPRECATION NOTICE] Docker Image Format v1 and Docker Image manifest version 2, schema 1 support is disabled by default and will be removed in an upcoming release. Suggest the author of docker.io/library/perl:5.14 to upgrade the image to the OCI Format or Docker Image manifest v2, schema 2. More information at https://docs.docker.com/go/deprecated-image-specs/ Warning: Docker pull failed with exit code 1, back off 5.148 seconds before retry. /usr/bin/docker pull perl:5.14 5.14: Pulling from library/perl [DEPRECATION NOTICE] Docker Image Format v1 and Docker Image manifest version 2, schema 1 support is disabled by default and will be removed in an upcoming release. Suggest the author of docker.io/library/perl:5.14 to upgrade the image to the OCI Format or Docker Image manifest v2, schema 2. More information at https://docs.docker.com/go/deprecated-image-specs/ Warning: Docker pull failed with exit code 1, back off 4.06 seconds before retry. /usr/bin/docker pull perl:5.14 5.14: Pulling from library/perl [DEPRECATION NOTICE] Docker Image Format v1 and Docker Image manifest version 2, schema 1 support is disabled by default and will be removed in an upcoming release. Suggest the author of docker.io/library/perl:5.14 to upgrade the image to the OCI Format or Docker Image manifest v2, schema 2. More information at https://docs.docker.com/go/deprecated-image-specs/ Error: Docker pull failed with exit code 1 

 matrix: os: - ubuntu-22.04 perl-version: - '5.8' - '5.10' - '5.12' - '5.14' - '5.16' - '5.18' - '5.20' - '5.22' - '5.24' - '5.26' - '5.28' - '5.30' - '5.32' - '5.34' - '5.36' - 'latest' container: image: perl:${{ matrix.perl-version }} 

GitHub Actions says "upgrade the image to the OCI Format or Docker Image manifest v2, schema 2." · Issue #161 · Perl/docker-perl

Today I started seeing this, which means that all of my Perl testing is borked (thanks for the heads up GitHub). I think you are the source I'm pulling from, but if I'm not, do you know where I sho...

^GitHub

This week in PSC (151) | 2024-06-13

https://blogs.perl.org/users/psc/2024/06/this-week-in-psc-151-2024-06-13.html

I have an input string that has "comments" in it that are in the form of: everything after a ; is considered a comment. I want to remove all comments from the string and get the raw text out. This is a pretty simple regexp replace except for the fact that ; characters are valid non-comments inside of double quoted strings.

How can I improve the remove_comments() function to handle quoted strings with semi-colons in them correctly?

```perl use v5.36;

my $str = 'Raw data ; This is a full-line comment More data ; comment after it Some data "and a quoted string; this is NOT a comment"';

my $clean = remove_comments($str);

print "Before:\n$str\n\nAfter:\n$clean\n";

sub remove_comments { my $in = shift();

$in =~ s/;.*//g; # Remove everything after the ; to EOL return $in; 

submitted by /u/scottchiefbaker
[link] [comments]

Hi,

im looking to put my website written in perl that currently runs locally inside apache out on the internet.

I dont want to host myself, and i dont have lots of spare time to config or money to spend for a vps.

Does anyone have experiences and can recommend a webhoster for maybe 10-15 bucks a month where i can just get a simple interface with ssh, where i can put an index.cgi somewhere(dont care if its in cgi-bin or public_html or something else,

i want something where i can just checkout my git repo thta contains index.cgi in its root and just works.

Thank you in advance!

submitted by /u/throwawaybambo
[link] [comments]

Thanks to a pile of new data added and old data cleaned up (most of that work done by Philippe Bruhat and Aristotle Pagaltzis) and some help from Copilot on the Javascript, there's a lot of new, interesting information on my Perl Steering Council web page - https://psc.perlhacks.com/

submitted by /u/davorg
[link] [comments]

Perl Weekly Challenge 273: B After A

https://blogs.perl.org/users/laurent_r/2024/06/perl-weekly-challenge-273-b-after-a.html

Perl Weekly Challenge 273: Percentage of Character

https://blogs.perl.org/users/laurent_r/2024/06/perl-weekly-challenge-273-percentage-of-character.html

I know it is something of an obscure corner of everything that Perl can do, but Perl is excellent for "one-liners".

Has anyone developed a module of convenience functions for use with one-liners? I have something in progress but I'd like to see if there is established prior art.

submitted by /u/singe
[link] [comments]

Stack:

Nginx FCGI CGI::Fast HTML::Template::Compiled Redis CentOS Linux 7.9 spawn-fcgi 

On process init it does a lot of loading of big hashes and other data into global variables that are mostly preloaded and cached in a distributed Redis install.

To start the application spawn-fcgi creates 6-8 processes on a port nginx then connects to trhough their fcgi module.

The challenge:

— The init process is computing and time consuming; and doing that concurrently six times peaks CPU and overall leads to a ~20-25 second delay before the next web request can be served. And the initial request to each of the six processes has that delay.

I tried loading the content in question directly from Redis on demand but the performance keeping it in memory is naturally much better (minus the initial delay).

is there an architectural pattern that I am not considering here? I am thinking of things as eg. only spinning up one process, having it initialize and then clone(?) it a few times for serving more requests.

I could also think of a way where only 1 process is spawned at a time and once it completes initiation the next one starts; would need to verify that spawn-fcgi can support this.

So my question to this community is if I am missing an obvious better solution than what is in place right now / what I am considering.

Thanks in advance.

submitted by /u/kosaromepr
[link] [comments]

I am moving a pile of stuff off of an older Intel Mac Mini onto an M2. Have almost everything migrated, but am stuck on getting a Perl script that relies heavily on DBD::mysql to work. I finally got cpan to build the module, but when I try to use it in actual code, I get: dyld[82852]: missing symbol called. I go through this mess periodically with OS upgrades...and it's possible that this is (once again) OSX ignoring the module because it's not signed. But the given error sounds more like Perl not finding the dynamic library(s) the module was built with...if I just have a script containing "use DBD::mysql;", that doesn't throw an error, which suggests Perl found the module and loaded it. But chokes when it tries to use it.

I'd be fine with building this module with static libraries, if the process of doing so is easy. But have not seen an easy option to cpan to go that route. Suggestions?

submitted by /u/rlmalisz
[link] [comments]

Perl Weekly Challenge 272: String Score

https://blogs.perl.org/users/laurent_r/2024/06/perl-weekly-challenge-272-string-score.html

my $result = $some_value / scalar(split(",", $some_array[0])); 

my @ar_foo = ("1", "2", "3"); my $bar = "5"; my $x = $bar / scalar(@ar_foo); 

This week in PSC (150) | 2024-06-06

https://blogs.perl.org/users/psc/2024/06/this-week-in-psc-150-2024-06-06.html

Equalise an Array

https://blogs.perl.org/users/e_choroba/2024/06/equalise-an-array.html

Struggling to find what people write perl code on.

submitted by /u/SquareRaspberry3808
[link] [comments]

This is the frame body I was using:

our $frame_body = $mw->Frame(-background => $color_theme_bg, -foreground => $color_theme_fg)->pack(-side => 'top'); 

 $frame_body ->Label( -text => "@_", -font => $arial_font, -foreground => $color_theme_fg, -background => $color_theme_bg, -highlightthickness => 0, -takefocus => 0, -relief => "flat", -justify => 'center', )-> grid( -column => $mw_col_ctr, -row => $mw_row_ctr, -sticky => "nsew", ); 

Its also nice if automatically adjust incase I manually resize the window. 😀

submitted by /u/DemosaiDelacroix
[link] [comments]

Perl Weekly Challenge 272: Defang IP Address

https://blogs.perl.org/users/laurent_r/2024/06/perl-weekly-challenge-272-defang-ip-address.html

Is there a way to replace accented characters by their plain version, something like

tr/ûšḥ/ush/?

submitted by /u/Patentsmatter
[link] [comments]

Is it possible to display an image to the user, without loading all the trappings of a whole widget / event-loop environment like Prima, Tk, Wx, Win32::GUI, etc?

Specifically, I want something simple that I can execute in a BEGIN block to display a splash image to the user while the rest of the application is compiled and initializes, which takes about 5-10 seconds. The program in question is a perl Wx application running under MS Windows.

submitted by /u/sue_d_nymme
[link] [comments]

This week in PSC (149) | 2024-05-30

https://blogs.perl.org/users/psc/2024/05/this-week-in-psc-149-2024-05-30.html

Vim highlights subs with a signature params as red/orange to alert you it's incorrect. Now that Perl actually supports signatures and this is no longer a syntax error I need to find a way to disable this. This is really a Vim question, but I'm sure some other Perl nerd out there has run into this before me.

Has anyone figured out how to disable this "warning" in Vim?

submitted by /u/scottchiefbaker
[link] [comments]

Perl Weekly Challenge 271: Sort by 1 Bits

https://blogs.perl.org/users/laurent_r/2024/05/perl-weekly-challenge-271-sort-by-1-bits.html

MariaDB 10 and SQL::Translator::Producer

https://blogs.perl.org/users/usna78/2024/05/mariadb-10-and-sqltranslatorproducer.html

Perl Weekly Challenge 271: Maximum Ones

https://blogs.perl.org/users/laurent_r/2024/05/perl-weekly-challenge-271-maximum-ones.html

Perl Toolchain Summit 2024 in Lisbon

https://blogs.perl.org/users/kenichi_ishigaki/2024/05/perl-toolchain-summit-2024-in-lisbon.html

# Perl Weekly Challenge 270: Special Positions

https://blogs.perl.org/users/laurent_r/2024/05/-perl-weekly-challenge-270-special-positions.html

Hi, I recently got an offer for Senior SWE (current title at my company now) for a company that heavily utilizes Perl. I was wondering if folks from this community could offer some insight on what it's like working with Perl and also what, if any, potential long-term career implications are of becoming a Perl developer? Particularly I'm worried of pigeon-holing myself since Perl is not as heavily used in todays age and this company does not make use of modern cloud tools and deployments.

I am a Java developer (5 YOE) at a enterprise software company that is deployed in GCP. We are pretty regularly adopting new technologies so I'm gaining some valuable and relevant industry experience here but I am looking for a change and more opportunity to lead projects and mentor junior engineers.

The company seems good, great WLB, I liked the manager, and with the bonus (base is roughly the same) it would be about a ~8% TC increase plus a lot more stock (monopoly money, private RSUs).

Does anyone have experience transitioning from a Perl based company to a cloud based company with a more modern tech stack? Is this a backwards direction for me, should I continue with my Java development and instead look for opportunities that will offer more marketable skills?

Any input is appreciated, thank you for reading.

submitted by /u/Roodiestue
[link] [comments]